bz-COR acrylic exterior

This single-component acrylic varnish is an optimal choice for a finish on steel and corten steel in exterior applications. It is a hard-wearing varnish, applied over the bp-COR product. Application is straightforward — by brush, roller, or spray gun. The best results are achieved with a spray gun, as the layers must be applied while the previous one is still wet and tacky, avoiding touching the varnish, resulting in a smoother, more even finish.

Available in 3 finishes: matt / satin / gloss.

Supplied with a bottle of acrylic solvent to improve application.

VERY IMPORTANT: Read the Technical Data Sheet and Safety Data Sheet carefully before use, both for the correct application technique to achieve the desired results and to comply with safety and environmental protection regulations.

Before applying any varnish, it is essential to first stop the oxidation with bp-COR and allow it to dry for at least 48 hours.