bz-COR varnish

This is part of our range of protective and finishing varnishes and gives a satin appearance. This varnish provides a double function, acting as a membrane for the polyurethane varnishes that you will want to add next or if you prefer to leave it as the final layer, then it gives a satin finish to iron and corten steel surfaces used INSIDE (provided they are not subjected to contact with water, a high degree of constant humidity or can easily suffer from constant friction or damage to the surface). It is a varnish of medium hardness. It is easy to apply and dries quickly.

VERY IMPORTANT: Please read the product’s Technical Data Sheet and Product Safety Sheet carefully to ensure correct use, to understand both how the product needs to be applied to obtain the desired results and to comply with the relevant safety and environmental protection standards.

In order to apply the bz-COR varnish, it is essential to do this only after the oxidation process has been stopped with bp-COR and having allowed it to dry for at least 48 hours.

FREQUENTLY ASKED QUESTIONS

Yes, it is a solvent-based product. Always read the product’s Safety Data Sheet (SDS) and Technical Data Sheet (TDS) before starting to use it.

The product must be applied in a well-ventilated space, and face masks (for painters) and latex gloves need to be worn. Always read the product’s Safety Data Sheet (SDS) and Technical Data Sheet (TDS) before starting to use it.

No, bz-COR is an interior varnish and should not be used outdoors.

It is a very natural varnish and after application a thin layer is formed, so it is not especially resistant against scratches.